Factory Cheap Hot Exploding Pop Rivets - Stainless Steel Uni Grip Rivet High Strength Structural Blind Rivets – Fixpal

Material

Specification

Size	Drill	Part No.	M	Grip range	B	K	E	Shear	Tensile
			max		max	max	max	KN	KN
3.2 (1/8″)		BBP61-0408	8.9	1.0-3.0	6.6	1.1	2.1	1.6	2.0
		BBP61-0411	11.4	3.0-5.0	6.6	1.1	2.1	1.7	2.0
		BBP61-0414	13.6	5.0-7.0	6.6	1.1	2.1	3.2	2.0
4.0 (5/32″)		BBP61-0509	10.1	1.0-3.0	8.0	1.5	2.6	5.2	4.0
		SSP01-0512	12.5	3.0-5.0	8.0	1.5	2.6	5.2	4.0
		BBP61-0516	15.1	5.0-7.0	8.0	1.5	2.6	5.2
4.8 (3/16″)		BBP61-0611	12.9	1.5-3.5	9.6	1.5	3.1	5.5	5.0
		BBP61-0614	15.5	3.5-6.0	9.6	1.5	3.1	5.5	5.0
		BBP61-0618	18.5	6.0-8.5	9.6	1.5	3.1	5.5	5.0

Application

Uni-Grip type blind rivets are structural type blind rivets. Uni grip type blind rivets pull rivet rifles into single -drum types when riveting rivets, clamp the two structural parts to be riveted, and reduce the pressure on the surface of the structural part. It is suitable for high intensity riveting. Thin structured parts. It has a certain protective effect on riveting parts to avoid deformation of riveting holes and destroying riveting parts.

The main purpose of general Uni grip type blind rivets is for vehicles, ships, buildings, machinery, electrical, aircraft, containers, elevators and other industries.

What are the ways to prevent rust of Blind Rivets

1. Plating
Plating the blind rivet, this method is to put the rivet into the metal solution, and then use the current to apply a layer of metal to the surface, which has many effects on this layer of metal.

2. Mechanical coating
The mechanical plating of the blind rivet is to allow the metal particles to cold welded the blind rivets to ensure that the surface of the blind rivet has some effects. The mechanical coating and electroplating are basically the same, but the methods are different. The results can be said to be the same.

3. Hot treatment
For thermal treatment of blind rivet surfaces, some pop rivet surfaces are relatively hard, so you can heat the pop rivets to ensure that the pop rivet has sufficient hardness. This is why heat treatment is performed.

4. Surface passivation
Passing the blind rivet surface has two main functions. One is to enhance the hardness of the rivets, and the other is to greatly reduce the oxidation level of the blind rivets.